Frequently Asked Questions

It only takes 3 simple steps…

1. Make sure furniture or surfaces are cleaned and dry before application of Regal Oil.
2. Liberally apply oil evenly on furniture with a brush or lint free rag.  Make sure it is completely covered, then wipe off any excess oil.
3. Let furniture set until dry (anytime between 4 and 24 hours).  If material is dry within 4 hours, one more coat may be necessary.  After 24 hours, wipe off excess and replace cushions (if applicable).

Note: After using, wash hands thoroughly.  Treatment should be done twice a year, preferably in the Spring and Fall.

Yes, it will work on any wood that has been treated or stained.  You can also use it on vinyls and plastics, but not to be used on cloth materials such as seat cushions.

No, surfaces need to be cleaned before applying Regal Oil for protection.  If you need to wash down the furniture first, make sure it is completely dry before treatment.

Regal Oil is FDA approved; however, not to be ingested.  If eye contact occurs, flush eyes with water.  See a doctor if necessary.

No.  If your furniture is already faded or damaged it will not restore the wood.  However, if you are able to re-stain the wood due to fading, you can then apply Regal Furniture Oil to preserve the new finish.

It only takes 3 simple steps…

1. Make sure the surfaces are cleaned and dry before application of Regal Oil.
2. Liberally apply oil evenly with a lint free rag.  Make sure it is completely covered, then wipe off any excess oil.
3. Let set until dry (1-5 minutes).  If material is dry within 4 hours, one more coat may be necessary.  After 24 hours, wipe off excess oil.

Note: After using, wash hands thoroughly.  Treatment should be done twice a year, preferably in the Spring and Fall.

Yes, but it has not been tested on all colors of leather.  Test a small unnoticeable area first before applying.  The color of the leather may darken when Regal Automotive Restoration is applied so make sure to cover the entire surface to prevent spotting.

Yes, Regal Automotive Restoration can protect plastic trim and rubber molding from sun damage or dry rotting.

Yes, Regal Automotive Restoration can be used in any climate condition.  It has been tested to withstand temperatures from -60F to over 150F.

Yes, it can be used on clear plastic.  You must wipe on and then wipe off.  It can be used on motorcycle windshields, but do not use on automotive windshields due to the rubber on the wiper blades will absorb the product and may smear or streak the windshield.

Yes, it will help protect and shine tonneau covers and help prevent cracking or fading.

Yes, it will help prevent cracking or fading.

Yes, you can use it on rubber hoses, cables, and fluid containers for example.  This will help with drying out and improved appearance.

It only takes 3 simple steps…

1. Make sure the surfaces are cleaned and dry before application of Regal Oil.
2. Liberally apply oil evenly with a lint free rag.  Make sure it is completely covered, then wipe off any excess oil.
3. Let set until dry.  For optimum protection, it is recommended to wait up to 1-5 minutes before going back and doing a final wipe down of any excess oil.

Note: After using, wash hands thoroughly.

Regal Gun Oil is an excellent rust & oxidation inhibitor and can be used on all types of metal and will protect and enhance the appearance of your guns at the same time.

Yes, Regal Gun Oil works great on wood and plastic stocks for improving appearance and to protect it from wear and moisture.

Yes, Regal Gun Oil can be used in any climate condition.  It has been tested to withstand temperatures from -76F to over 150F.  It works great for lubricating moving parts in winter snow or icy conditions.

Regal Gun Oil can be used as a cleaner and protects against gun powder debris and buildups while lubricates at the same time.